Tuesday, December 25, 2012

5.7 GHz poor guy transverter

Not so many simple transverters for 6cm band seen up to now. So here is one, really simple and working, with minimum parts required and poor guy like me did find all the parts within the pile of microwave "LEGO bricks".

The architecture is traditional and straightforward, no bells and whistles in this design. The core of the transverter is the mixer. Simple as it can be, SKY-60 double balanced mixer working up to 6GHz with affordable price, new through the e-bay purchase. Drive on the IF port 0dBm @ 432MHz, +7dBm @ 5328MHz for the LO port. On the output RF port we have LO, LO+432MHz and LO-432MHz signal present. To get rid of the unwanted signals the mixer is followed by the filter. Here we can use many types of filters but the pipe cap was a simple and cheap solution, can be tuned easily even with no special measuring equipment. Tune to peak method will give good results. Of course the frequency is 5760MHz. This filter will be used both , for RX and TX operation. PIN diodes, RF switch, relay, resistor splitter or Wilkinson divider. Well, the Wilkinson divider was appropriate and simple enough for this approach. More over, no switching required for RX/TX operation. I made mine from the old 1.8GHz cellular equipment easily cutting out the peace of the PCB with the printed divider. Simple calculation, sharp x-act knife and the divider legs were modified to L/4 @ 5.760MHz. This way I end up with two ports, one for the RX and the other for the TX side of the transverter. For the RX front end i choose not the best, but cheap and simple MMIC block with the MGA-86563 declared to work up to 6GHz with not so bad performance. The MMIC was biased for the maximum gain with 8V power supply. On the transmitting side there is also a MMIC block, simple Sirenza SNA-586 good up to 6GHz biased for the maximum gain with 8V power supply. 


So this is it, a simple transverter, of course with the limited performance but good for the quick qso with the neighbor station or somebody on the hill within the line of sight. To operate this transverter we need some kind of local oscillator and a simple electronics handling the power and antenna switching. Crystal oscillator with the chain of multipliers can give us maybe better phase noise but better stability and more flexibility in choosing the IF insure the synthesizer built fir microwave frequencies. I choose the VK3XDK Si-4133 synthesizer version with the 16 programmable frequencies. The synthesizer is locked to high quality 10MHz double oven oscillator granting excellent stability and lower phase noise comparing to the cheap 10MHz canned oscillators. I prefer to use the 70cm IF so the LO was programmed to 1776MHz. The 13dBm output was attenuated with the 7db attenuator to safely drive the 3x multiplier box producing some 15dBm of the signal @ 5328MHz. Again 7db attenuator between the multiplier and mixer to bring the signal to the required mixer level. At the same time the mixer was very happy to "see" the 50 ohms impedance at any port. For this experiment i choose the IF 432MHz, but much better will be 434 or higher. Not more than 0dBm is required on the mixer IF port, so the 27dBm (500mW) signal from the FT-817d was reduced with the 26db attenuator at the sequencer board. Sequencer is also switching the power for the MMICs in the transverter as well as the power for the coaxial relay at the output. RF sensing and PTT ports insuring high protection. If the coaxial relay or RF electronic switch is not available we can use two separate antennas for the RX and TX. With this arrangement the setup is ready for the smoke test and initial qso testing. The output power is low, not reaching not even 1mW and the conversion gain is also poor just a few db so some extra amplification is required for serious work. 


Good LNA will lower the noise figure and improve the conversion gain and on the other side a few MMICs on the TX side will give us pleasure to work some distant stations. Just for the test I add another SNA-586 on the TX side bringing the signal up to the 3dBm. Not much, but at the same time I add another pipe cap filter between the MMIC blocks to reach the cleaner signal at the output. Result can be seen at the video. The same approach can be used to build the transverter for the other microwave bands, so no excuse for the low activity at the microwave bands. 

So "Use them or lose them"


10 comments:

  1. Hey Adam, nice lash up! What is your Transverter controller board?

    ReplyDelete
  2. It is a simple PTT (ground) control plus RF sensing control with IF attnuator switching and DC power switching part. A kind of small sequencer, very primitive one.

    ReplyDelete
  3. INSTEAD OF GETTING A LOAN,,  I GOT SOMETHING NEW
    Get $5,500 USD every day, for six months!

    See how it works
    Do you know you can hack into any ATM machine with a hacked ATM card??
    Make up you mind before applying, straight deal...

    Order for a blank ATM card now and get millions within a week!: contact us
    via email address::{Automatictellers@gmail.com}

    We have specially programmed ATM cards that  can be use to hack ATM
    machines, the ATM cards can be used to withdraw at the ATM or swipe, at
    stores and POS. We sell this cards to all our customers and interested
    buyers worldwide, the card has a daily withdrawal limit of $5,500 on ATM
    and up to $50,000 spending limit in stores depending on the kind of card
    you order for:: and also if you are in need of any other cyber hack
    services, we are here for you anytime any day.

    Here is our price lists for the ATM CARDS:

    Cards that withdraw $5,500 per day costs $200 USD
    Cards that withdraw $10,000 per day costs $850 USD
    Cards that withdraw $35,000 per day costs $2,200 USD
    Cards that withdraw $50,000 per day costs $5,500 USD
    Cards that withdraw $100,000 per day costs $8,500 USD

    make up your mind before applying, straight deal!!!

    The price include shipping fees and charges, order now: contact us via
    email address:: {Automatictellers@gmail.com}

    Visit our Website for more Info: automatictellers.webs.com
    ®

    ReplyDelete
  4. Hello Everyone. I want you all to know about the hacked atm card, for those of you who been fighting for financial issues, here is a great chance for you to get a blank atm card, you can use this blank atm card to withdraw anywhere around the world, you can withdrawal up to $3,000 USD per day with this card and also you can use it to shop online and attach it to your PayPal, if you want to get one for yourself, contact via email: (harrybrownn59@gmail.com), do not miss this great opportunity of your life, contact them now and thank me later.

    ReplyDelete

  5. I've been seeing posts and testimonials about BLANK ATM CARD but I never believed it, not until I tried it myself. It was on the 12th day of March. I was reading a post about places to visit in Slovakia when I saw this captivating post about how a Man described as Mr Harry changed his life with the help of a Blank Atm Card. I didn't believe it at first until I decided to reach him through the mail address attached to the post. To my greatest imagination, it was real. Right now am living up to a standard I never used to live before. Today might be your lucky day! Reach Mr Harry via email: (harrybrownn59@gmail.com) see you on the brighter side of life. you can also text him on his number:+1(661)-797-0921

    ReplyDelete
  6. i was lost with no hope for my wife was cheating and had always got away with it because i did not know how or
    always too scared to pin anything on her. with the help a friend who recommended me to who help hack her phone,
    email, chat, sms and expose her for a cheater she is. I just want to say a big thank you to
    HACKINTECHNOLOGY@GMAIL.COM . am sure someone out there is looking for how to solve his relationship problems, you can also contact him for all sorts of hacking job..he is fast and reliable. you could also text +1 213-295-1376(whatsapp) contact and thank me later
    telegram +16692252253

    ReplyDelete
  7. Good day everyone.
    my name is Mitchell Freeman wanted to share a little bit of testimony about how I was able to get my financial breakthrough after a long time of heartbreak from so called scammers OFFICIAL CYBER HACKERS helped me became what I am right now after I made $100,000USD from their bank transfer hack service they are legit everyone needs to work with them they are legit I trust them they are legit everyone contact them via this details

    email ;officialhackers52@gmail.com
    WhatsApp ; +1 (437) 703-3498
    website :officialonlinehacks.wordpress.com

    contact them today and be free of debt and be stable financially OFFICIAL CYBER HACKER ARE THE BEST

    ReplyDelete
  8. How to Play Baccarat (Baccarat) from ProTipster |
    In order to understand the Baccarat Rules, we will be deccasino talking to one of the most well 바카라 known expert tipsters. We will share 메리트카지노 the secrets

    ReplyDelete
  9. GOOD CARD WITH COOL CASH...Get THE 2022 BLANK ATM Programmed Card and cash money directly in any ATM Machine around you. There is no risk of being caught, because the card has been programmed in such a way that it´s not traceable, it also has a technique that makes it impossible for the CCTV to detect you and you can withdraw a total sum of $5,000.00 USD daily,try and get yours today from (MR OSCAR WHITE ) of oscarwhitehackersworld@gmail.com And be among the lucky ones who are benefiting from it. Now email the hacker :  oscarwhitehackersworld@gmail.com or Text/WhatsApp +1(330)-732-5665

    ReplyDelete